Sports Lid

ECOtanka Sports Lid

 

The ECOtanka Sports Lid is a plastic lid made from PP#5 which is considered to be one of the safest plastics for food.  This lid is BPA FREE, it is also BPS & BPF FREE.  ( The industry removed BPA from polycarbonate plastics and changed to BPS or BPF which is in fact just as bad as BPA!  )

This lid can fit almost all bottles except the megaTANKA bottle and is best suited for the single wall bottles because the dust cover does not fit the thermoTANKA bottles.

ECOtanka PP#5 sports lid
ECOtanka PP#5 sports lid
ECOtanka PP#5 sports lid

ECOtanka Sports Lid Advantages

The sports lid was designed to be leak-proof and more environmentally-friendly compared to many other lids on the market.  The advantages of this lid are as follows:
​​​​​​​
- 3 sealing points, which makes it much harder for your lid to leak.
- Dust cover keeps your drinking area clean and safe.
- Replaceable sipper parts turn your lid into a new lid saving you money and environmental waste.
- The main body is made with a special type of plastic that is 20x stronger than standard plastic.
- All parts are replaceable and raw materials are high-quality materials from Germany, USA, Japan or Singapore.

 
ECOtanka sports lid sipper replacement part

Replacement Sippers

ECOtanka provides a replacement set of 4-pack sippers for renew your sports lid when the sipper part has worn out from use or been chewed on.   

Lid Specifications

The ECOtanka sports Lid is made from a few different materials that are sourced all over the world and imported into China.

The sports lid has 4 parts that are made from different materials respectively as follows:
   - The main body is made from PP#5 (Polypropylene) but is of a special and expensive type which makes the lid 20x stronger.  Origin: Japan or Singapore.
   - The sipper part is made from a high-quality material called TPR (Thermoplastic Rubber) food grade.  Origin: USA.
   - The dust cover has been made from a special form of PE (Polyethylene) to be strong and flexible. Origin: Taiwan.
   - The silicone seal is of high-quality food-grade silicone. Origin: Germany.

 This lid is BPA, BPS, BPF FREE, also free from Antimony (sb), DEHA, DEHP & Phthalate.

All of our materials are tested once every 5 years with an independent third-party lab, SGS Shanghai China.  All material orders are tracked and traced using a BOM (Bill of Materials) system so we can trace back to the raw supplier for any problem that we may find for its safety.  2018, July SGS Report,​​​​​​​​​​ 2018, July BV BPA & BPS Report

 
ECOtanka PP#5 sports lid group

Care Instructions:

ECOtanka sports lid is a very easy care lid, simply wash and rinse well the same as for your dishes.   This lid is dishwasher safe and can be sterilised with boiling water.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here. 


2 Year Warranty

All ECOtanka products come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

Adaptor Lid

ECOtanka Adaptor Lid

The ECOtanka Adaptor Lid is a plastic lid made from PP#5 which is considered to be one of the safest plastics for food.  This lid is BPA FREE, it is also BPS & BPF FREE. ( The industry removed BPA from polycarbonate plastics and changed to BPS or BPF which is in fact just as bad as BPA!)

This lid can fit almost all bottles except the megaTANKA bottle but is best suited for the teeny or miniTANKA bottles for Kids.  The Adaptor is only a two-piece lid that can fit a number of teet products on the market.  At this stage we don't supply the teet with this lid.

ECOtanka PP#5 adaptor lid
ECOtanka PP#5 adaptor lid
ECOtanka PP#5 adaptor lid

Baby teet

The Adaptor lid can fit most standard baby teets on the market, giving you the choice to buy the right type and the right brand you prefer for your baby.

ECOtanka PP#5 adaptor lid with teet
ECOtanka 350ml bottle with kooler cover and baby

Lid Specifications

The ECOtanka Adaptor Lid is made from PP#5 (Polypropylene) and is strong, tough, also has a high resistance to heat.  The adaptor is a two-part lid with the bottle part threading into the bottle and the top part inserting your baby teet spout and then fitting to the threaded part.  This lid is BPA, BPS, BPF FREE also is free from Antimony (sb), DEHA, DEHP & Phthalate. 2018, July SGS Report,​​​ 2018, July BV BPA & BPS Report


The PP#5 raw material is made in Taiwan and our lid is formed in China.
The adaptor lid also contains a silicone seal to seal the lid to the bottle.  This silicone raw material is made in Germany and imported into China to be formed.

All of our materials are tested once every 5 years with an independent third-party lab, SGS Shanghai China.  All material orders are tracked and traced using a BOM (Bill of Materials) system so we can trace back to the raw supplier for any problem that we may find for its safety.   2018, July SGS Report

Care Instructions:

ECOtanka Adaptor lid is a very easy care lid, simply wash and rinse well the same as for your dishes.   This lid is dishwasher safe and can be sterilised with boiling water.

Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here. 

2 Year Warranty

All ECOtankas come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

thermoTANKA 800ml

ECOtanka thermoTANKA 800ml Double Wall Vacuum Bottle

The thermoTANKA 800ml bottle is a slightly wider design measuring approximately 238mm from the bottom to the top of the bottle only.  This bottle is perfect for an everyday drink bottle providing a volume of 800mls (three regular sized glasses), keeping your drink cold or hot longer.   

ECOtanka thermoTANKA gives you a Pure Clean Fresh drink every single time.

The vacuum properties of the thermoTANKA can keep your drink hot form 7.5-10+ hours, cold for 7-8+ hours and ICE for up to 65 hours depending on the lid type.   
NOTE: temperatures may vary due to lid types, outside conditions and the number of times you remove the lid.
​​​​​​​thermoTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids). 

 
ECOtanka thermotanka 800ml with stainless steel classic lid

thermoTANKA 800ml
w/S.S. bamboo lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 800ml with stainless steel classic lid

thermoTANKA 800ml
w/S.S. classic lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 800ml with stainless steel classic lid

thermoTANKA 800ml
w/S.S. modern lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 800ml with stainless steel classic lid

thermoTANKA 800ml
w/S.S. 44wave lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 800ml with screwtop lid

thermoTANKA 800ml
w/screwTOP lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 800ml with poly loop lid

thermoTANKA 800ml
w/poly loop lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA History

ECOtanka designed the thermoTANKA in 2008 and made the first bottle in 2009.  Since then everyone liked the design and copied it, you can now see our design everywhere!!  The thermoTANKA was originally designed to keep drinks colder longer due to the insulation function of the vacuum, but people like it so much they now keep hot drinks in the bottle.  One bottle for summer and winter!

 

Bottle Specifications

The specifications on this page are only for the thermoTANKA 800ml bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  238mm +/- 0.4
Bottle Weight: 322grams +/- 5g


Bottle Diamater: 78mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness outter layer: 0.5mm +/- 0.02 (material used)
Bottle thinkness inner layer: 0.4mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtankas come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

Summer Tip:

To make a drink that stays cool for hours in summer, simply fill your bottle with ice cubes, top with water, then fit a kooler cover over your bottle.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

 

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

thermoTANKA 350ml

ECOtanka thermoTANKA 350ml Double Wall Vacuum Bottle

The thermoTANKA 350ml bottle is designed for kiddies, or for adults who want a bottle that will fit into a small bag or handbag. It holds a volume of 350ml (one large glass) and ideal for keeping your milk cold well on the go, measuring approximately 152mm from the bottom to the top of the stainless steel area.  The vacuum properties of the thermoTANKA can keep your drink hot for 6+ hours and cold for 12+ hours.  

​​​​​​​thermoTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids) and adaptor lids are also available to fit a range of teets, so the thermoTANKA can also be used as a safe BPA free bottle for your baby:

 
ECOtanka thermotanka 350ml with stainless steel classic lid

thermoTANKA 350ml
w/S.S. bamboo lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with stainless steel bamboo lid

thermoTANKA 350ml
w/S.S. classic lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with stainless steel Modern lid

thermoTANKA 350ml
w/S.S. modern lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with stainless steel Modern lid

thermoTANKA 350ml
w/S.S. 44wave lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with screwtop lid

thermoTANKA 350ml
w/screwTOP lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with poly loop lid

thermoTANKA 350ml
w/poly loop lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with adaptor lid

thermoTANKA 350ml
w/adaptor lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with adaptor lid with teet

Baby teet

The ECOtanka Adaptor lid can be fitted to any bottle within the 350ml to the 800ml range.  The Adaptor can fit most standard baby teets so that you can buy the right one and the right brand to fit the Adaptor to use a stainless steel bottle for your baby. 
 

thermoTANKA History

ECOtanka designed the thermoTANKA in 2008 and made the first bottle in 2009.  Since then everyone liked the design and copied it, you can now see our design everywhere!!  The thermoTANKA was originally designed to keep drinks colder longer due to the insulation function of the vacuum, but people like it so much they now keep hot drinks in the bottle.  One bottle for summer and winter!

 

Bottle Specifications

The specifications on this page are only for the thermoTANKA 350ml bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  152mm +/- 0.4
Bottle Weight: 180grams +/- 5g


Bottle Diamater: 73mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness outter layer: 0.5mm +/- 0.02 (material used)
Bottle thinkness inner layer: 0.4mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtankas come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

Summer Tip:

To make a drink that stays cool for hours in summer, simply fill your bottle with ice cubes, top with water, then fit a kooler cover over your bottle.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

 

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

thermoTANKA 600ml

ECOtanka thermoTANKA 600ml Double Wall Vacuum Bottle

The thermoTANKA 600ml bottle is a tall slim design measuring approximately 228mm from the bottom to the top of the bottle only.  This bottle is perfect for primary school children, or adults who want a bottle that will hold a volume of 600mls (two large glasses), keeping your drink cold or hot for a few hours.   

​​​​​​​ECOtanka thermoTANKA gives you a Pure Clean Fresh drink every single time.

The vacuum properties of the thermoTANKA can keep your drink hot for 8+ hours and cold for 8+ hours depending on the lid type.
NOTE: temperatures may vary due to lid types, outside conditions and the number of times you remove the lid.
​​​​​​​thermoTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids). 

 
ECOtanka thermotanka 600ml with stainless steel classic lid

thermoTANKA 600ml
w/S.S. bamboo lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 600ml with stainless steel classic lid

thermoTANKA 600ml
w/S.S. classic lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 600ml with stainless steel classic lid

thermoTANKA 600ml
w/S.S. modern lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 600ml with stainless steel classic lid

thermoTANKA 600ml
w/S.S. 44wave lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with screwtop lid

thermoTANKA 600ml
w/screwTOP lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka thermotanka 350ml with poly loop lid

thermoTANKA 600ml
w/poly loop lid

Finish: Brush Stainless Steel
​​​​​​​Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA History

ECOtanka designed the thermoTANKA in 2008 and made the first bottle in 2009.  Since then everyone liked the design and copied it, you can now see our design everywhere!!  The thermoTANKA was originally designed to keep drinks colder longer due to the insulation function of the vacuum, but people like it so much they now keep hot drinks in the bottle.  One bottle for summer and winter!

 

Bottle Specifications

The specifications on this page are only for the thermoTANKA 600ml bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  230mm +/- 0.4
Bottle Weight: 245grams +/- 5g


Bottle Diamater: 73mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness outter layer: 0.5mm +/- 0.02 (material used)
Bottle thinkness inner layer: 0.4mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtankas come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

Summer Tip:

To make a drink that stays cool for hours in summer, simply fill your bottle with ice cubes, top with water, then fit a kooler cover over your bottle.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

 

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

Bottle Care Instructions

Bottle User Care Instructions


Dear Customer,

Thank you for purchasing a quality ECOtanka Drink Bottle.  This product is of solid stainless steel and with proper treatment and care, will provide you with a hygienically clean and ecologically friendly drink bottle to use for many years to come.


your safety assurance:

All ECOtanka brand bottles are made from 18/8, 304 Food Grade Stainless Steel.  ECOtanka lids are made from polypropylene #5 and/or 18/8, 304 Food Grade Stainless Steel.  All material parts are independently tested and guaranteed to be 100% food safe, non-toxic and non-leaching.


before use

It is recommended to thoroughly wash your bottle and lid in hot mild soapy water, rinse well and dry before use.

Make sure all silicone seal(s) have been fitted correctly to your lid before use to avoid leaking.  

For all thermoTANKA (vacuum) bottles, it is recommended to preheat your bottle before filling with your beverage for better heat retention.  Fill the bottle with hot water, stand for 3-5 minutes, remove water and fill. 

After each use wash your bottle in warm water and give a mild scrub with a bottle brush cleaner.  

NOTE: When cleaning your bottle or lid, we recommend not to submerge or soak your bottle or lid in water.  We recommend a simple quick hand wash and rinse, then dry.  


cleaning and care

Use white distilled vinegar for cleaning:  You can use household white distilled vinegar to help remove any stains or discolouration on the inside of your bottle. We recommend putting ½ cup of vinegar in your bottle, gently swirling the vinegar around to wash any affected areas and let sit for 5 - 15 minutes.  Rinse thoroughly with warm water and repeat if necessary.

Use baking soda for cleaning: For those stubborn spots inside your bottle, mix 2-3 tablespoons of baking soda with a small amount of warm water to form a scrubbing paste.  Dip the bristles of your bottle brush in the paste and work paste into affected area on the inside of your bottle.  Repeat as necessary until stain disappears.

If you have been using your ECOtanka bottle for alkaline water and there is a build-up of white calcium deposit, it may be cleaned with citric acid from the baking section of your local supermarket.  Citric acid is the acid from citrus fruits.

If your bottle gets a metalic taste, add 1 tsp of baking soda and warm water to help remove any tatse or odour, cleanse and refresh your bottle. 

To help protect and extend the life of bamboo parts fitted to lids or bottles, it is recommended to treat with mineral oil or bees wax with mineral oil regularly.

This product is supplied as a drink bottle only and is not intended for any other use. Please use this product as you would responsibly use a drink bottle and for safe consumption item only.


**do not**

Don’t put thermoTANKA (vacuum) bottles in a dishwasher.  The dishwasher could affect the insulation property of your bottle.
Don’t put painted bottles in a dishwasher.  The dishwasher could remove the paint/logo from your bottle.
Don’t put your bottle in the freezer, instead add ice cubes to your drink.
Don’t put your bottle in a microwave.
Don’t overfill your thermoTANKA (vacuum) bottle with hot water.
Don’t put hot water in a single-wall bottle unless you have the bottle protected with a kooler cover.  Singel-wall bottles are not designed for hot liquids.  


The better care you take of your bottle and lid the longer it will last.

5

megaTANKA 2000ml

ECOtanka megaTANKA 2000ml Single Wall Bottle

megaTANKA 2L is ideal for the whole family to top up from on a day trip or when out camping, or use it to store milk or beer, or brew beer! :-)  The 2L bottle gives you a days supply of liquid that can stay clean and fresh throughout the day.   This holds a volume of 2 litre (8 standard size glasses), are ultra light and measure approximately 255mm from the bottom to the top of the stainless steel area. 

megaTANKAs have their own poly spout lid and full stainless steel lid, they are the only bottle that does not fit the standard ECOtanka lid range.  megatanka KOOLER covers are also available, please see below.

 
megatanka 2L litre water bottle stainless steel

mgeaTANKA
w/2L mega PP lid

Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser

megatanka 2L litre water bottle stainless steel

mgeaTANKA
w/2L mega PP lid

Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser

megatanka 2L litre water bottle stainless steel

megaTANKA
w/2L mega S.S. lid

Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser

megatanka 2L litre water bottle stainless steel

megaTANKA
w/2L mega S.S. lid

Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser

megaTANKA Poly Loop Lid

The megaTANKA Poly Loop lid is a big lid that has been well designed for this bottle size.  The lid has a good grip all the way around the lid so you can get it tight to make sure it is sealed.  The spout has been designed so you can pour or drink directly from the bottle and the spout stopper/cover has a second seal and easy to click lock so the spout will not leak.  Also, the cover folds all the way back so it is out of your face if you are drinking directly from the bottle.

 
megatanka 2L litre water bottle stainless steel
megatanka 2L litre water bottle stainless steel
megatanka 2L litre water bottle stainless steel

Bottle Specifications

The specifications on this page are only for the megaTANKA bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Stainless 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  255mm +/- 0.4
Bottle Weight: 307grams +/- 5g


Bottle Diamater: 109.5mm
Bottle Opening: 65mm
Bottle thinkness: 0.5mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtanka products come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

ECOtanka KOOLER COVERS

megaTANKA KOOLER COVERS are insulating covers that keep your ECOtanka cool for much longer.  They are made from neoprene (wetsuit) material, are durable and soft, giving extra grip, colour and protection for your bottle along with a handy adjustable carry strap. 

Summer Tip:

To make a drink that stays cool for hours in summer, fill your bottle with ice cubes, top with water then fit a kooler cover.  The megaTANKA bottle has a very big wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your ECOtanka in the freezer. 

megaTANKA KOOLER covers are currently available in a number of colours, please see kooler cover sections for more details.

 
megatanka 2L litre water bottle stainless steel

ECOtanka mega
KOOLER COVER Blue

megatanka 2L litre water bottle stainless steel

ECOtanka mega
KOOLER COVER Camo

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

supaTANKA 1200ml

ECOtanka supaTANKA 1200ml Single Wall Bottle

supaTANKA is a special extra large drink bottle.  It holds a volume of 1.200 litres (four large glasses), are ultra light and measure approximately 236mm from the bottom to the top of the stainless steel area.   supaTANKA bottle size is for that little bit extra you need through the day.

supaTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids) and the supa size KOOLER covers.  

ECOtanka supatanka with sports lid

supaTANKA 1200ml
w/sports lid
​​​​​​​
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Silk Screen or Black Laser

ECOtanka supatanka with screwtop lid

supaTANKA 1200ml
w/screwtop lid

​​​​​​​Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Silk Screen or Black Laser

ECOtanka supatanka with poly loop lid

supaTANKA 1200ml
w/poly loop lid
​​​​​​​
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Silk Screen or Black Laser

ECOtanka supatanka with sports lid

supaTANKA 1200ml
w/S.S. bamboo lid
​​​​​​​
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka supatanka with screwtop lid

supaTANKA 1200ml
w/S.S. classic lid

​​​​​​​Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka supatanka with poly loop lid

supaTANKA 1200ml
w/S.S. modern lid
​​​​​​​
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka supatanka with stainless steel bamboo lid

supaTANKA 1200ml
w/S.S. 44wave lid
​​​​​​​Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

Bottle Specifications

The specifications on this page are only for the supaTANKA bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Stainless 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemials.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  236mm +/- 0.4
Bottle Weight: 207grams +/- 5g


Bottle Diamater: 91mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness: 0.5mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtanka products come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

ECOtanka KOOLER COVERS

supaTANKA KOOLER COVERS are insulating covers that keep your ECOtanka cool for much longer.  They are made from neoprene (wetsuit) material, are durable and soft, giving extra grip, colour and protection for your bottle along with a handy adjustable carry strap. 

Summer Tip:

To make a drink that stays cool for hours in summer, fill your bottle with ice cubes, top with water then fit a kooler cover.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

supaTANKA KOOLER covers are currently available in a number of colours, please see kooler cover sections for more details.

 

​​​​​​​
ECOtanka supa
KOOLER COVER

Photos Coming soon...

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

trekkaTANKA 1000ml

ECOtanka trekkaTANKA 1000ml Single Wall Bottle

trekkaTANKA bottle holds a volume of 1 litre (4 standard size glasses), are ultra light and measure approximately 236mm from the bottom to the top of the stainless steel area.  It provides a little more volume than a regular bottle, but without the extra bulk.   trekkaTANKA is suitable for half day trips such as a walk in the park, out and about doing jobs to keep you hydrated throughout the day.

trekkaTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids) and the trekka size KOOLER covers. 

 
ECOtanka trekkatanka with sports lid

trekkaTANKA 1000ml
w/sports lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with screwtop lid

trekkaTANKA 1000ml
w/screwtop lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with poly loop lid

trekkaTANKA 1000ml
w/poly loop lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with sports lid

trekkaTANKA 1000ml
w/S.S. bamboo lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with screwtop lid

trekkaTANKA 1000ml
w/S.S. classic lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with poly loop lid

trekkaTANKA 1000ml
w/S.S. modern lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka trekkatanka with stainless steel bamboo lid

trekkaTANKA 1000ml
w/S.S. 44wave lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

Bottle Specifications

The specifications on this page are only for the trekkaTANKA bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China



Bottle height:  236mm +/- 0.4
Bottle Weight: 195grams +/- 5g


​​​​​​​Bottle Diamater: 80mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness: 0.5mm +/- 0.02 (material used)


All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtanka products come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

ECOtanka KOOLER COVERS

trekkaTANKA KOOLER COVERS are insulating covers that keep your ECOtanka cool for much longer.  They are made from neoprene (wetsuit) material, are durable and soft, giving extra grip, colour and protection for your bottle along with a handy adjustable carry strap. 

Summer Tip:

To make a drink that stays cool for hours in summer, fill your bottle with ice cubes, top with water then fit a kooler cover.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

trekkaTANKA KOOLER covers are currently available in a number of colours, please see kooler cover sections for more details.

 



​​​​​​​ECOtanka trekka
KOOLER COVER

Photos Coming soon...

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer

sportsTANKA 800ml

ECOtanka sportsTANKA 800ml Single Wall Bottle

sportsTANKA is the most popular of the ECOtanka range.   It furnishes a volume of 800mls (three regular sized glasses) and fits most standard bottle holders, measuring approximately 236mm from the bottom to the top of the stainless steel area.

sportsTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids) and the sports size KOOLER covers.

 
ECOtanka sportstanka with sports lid

sportsTANKA 800ml
w/sports lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Black Laser

ECOtanka sportstanka with screwtop lid

sportsTANKA 800ml
w/screwtop lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Black Laser

ECOtanka sportsTANKA 800ml stainless steel bottle

sportsTANKA 800ml
w/poly loop lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Black Laser

ECOtanka sportstanka with sports lid

sportsTANKA 800ml
w/S.S. bamboo lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka sportstanka with screwtop lid

sportsTANKA 800ml
w/S.S. classic lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka sportsTANKA 800ml stainless steel bottle

sportsTANKA 800ml
w/S.S. modern lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

ECOtanka sportstanka with stainless steel bamboo lid

sportsTANKA 800ml
w/S.S. 44wave lid
​​​​​​​
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Black Laser

ECOtanka sportstanka with sports lid Purple

sportsTANKA 800ml PURPLE
w/sports lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with screwtop lid Purple

sportsTANKA 800ml PURPLE
w/screwtop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Purple

sportsTANKA 800ml PURPLE
w/poly loop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with stainless steel bamboo lid Purple

sportsTANKA 800ml PURPLE
w/S.S. bamboo lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with sports lid Green

sportsTANKA 800ml GREEN
w/sports lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with screwtop lid Green

sportsTANKA 800ml GREEN
w/screwtop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Green

sportsTANKA 800ml GREEN
w/poly loop lid
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with stainless steel bamboo lid Green

sportsTANKA 800ml GREEN
w/S.S. bamboo lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with sports lid Blue

sportsTANKA 800ml BLUE
w/sports lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with screwtop lid Blue

sportsTANKA 800ml BLUE
w/screwtop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Blue

sportsTANKA 800m l BLUE
w/poly loop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with stainless steel bamboo lid Blue

sportsTANKA 800ml BLUE
w/S.S. bamboo lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with sports lid Red

sportsTANKA 800ml RED
w/sports lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with screwtop lid Red

sportsTANKA 800ml RED
w/screwtop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Red

sportsTANKA 800ml RED
w/poly loop lid
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with stainless steel bamboo lid Red

sportsTANKA 800ml RED
w/S.S. bamboo lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with sports lid Bronze

sportsTANKA 800ml BRONZE
w/sports lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with screwtop lid Bronze

sportsTANKA 800ml BRONZE
w/screwtop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Bronze

sportsTANKA 800ml BRONZE
w/poly loop lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

ECOtanka sportstanka with poly loop lid Bronze

sportsTANKA 800ml BRONZE
w/S.S. bamboo lid
​​​​​​​
Finish: Transparent Painting
Material: Stainless Steel 304 18/8
​​​​​​​Logo: Laser Printed

Bottle Specifications

The specifications on this page are only for the sportsTANKA bottles and do not include the lid or kooler cover specs.  To view the material specifications for other product parts for this bottle, please visit each product page.

 


​​​​​​​This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.

All of our materials are tested once every 5 years with an independent supplier SGS Shanghai China.  All material batch orders are tested within the factory and all individual orders are self tested by our own team in China using two methods as follows:

1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.

Stainless Steel Origin:  China

Bottle height:  236mm +/- 0.4
Bottle Weight: 182grams +/- 5g


Bottle Diamater: 72mm
​​​​​​​Bottle Opening: 44mm
Bottle thinkness: 0.5mm +/- 0.02 (material used)


​​​​​​​All painted bottles are painted with a non-toxic environmentally friendly paint.
Bottle paint type: Standard transparent gloss finish

Logo Silk Screen Print: Printed using a high quality non-toxic environmentally-friendlly German paint/ink.  A hardener is also added to the paint/ink to make it set stronger and more durable.


​​​​​​​ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carrry out a material test every 5 years by an independent third-party lab.  All parts of ECOtanka products that come in contact with your liquid or food are tested.  

The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
- TPR for Sports Lid's Sipper part material

Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well.  As testing samples , we provide one product type for each material category. 

To view our latest test results, please click on the following document below:
2018, July SGS Report ​​​​​​​
​​​​​​​2018, July BV BPA & BPS Report

Care Instructions:

ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes.   Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle.  They may be sterilized with boiling water.  Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.


Packaging

The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.


2 Year Warranty

All ECOtanka products come with a 2-year warranty against faulty manufacturing.  If you have a problem with your bottle or lid, you can contact us or find out more information here:  support.ecotanka.com

 

ECOtanka KOOLER COVERS

sportsTANKA KOOLER COVERS are insulating covers that keep your ECOtanka cool for much longer.  They are made from neoprene (wetsuit) material, are durable and soft, giving extra grip, colour and protection for your bottle along with a handy adjustable carry strap. 

Summer Tip:

To make a drink that stays cool for hours in summer, fill your bottle with ice cubes, top with water then fit a kooler cover.  All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink.  Please do not place your tanka in the freezer. 

sportsTANAK KOOLER covers are currently available in a number of colours, please see kooler cover sections for more details.

 
ECOtanka sports 800ml kooler cover Dark Blue

ECOtanka sports
KOOLER COVER Blue

ECOtanka sports 800ml kooler cover Camo

ECOtanka sports
KOOLER COVER Camo

Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.

Find a Retailer