ECOtanka 350ml Vacuum Insulated
A To Go Cup with a Difference!
Make a difference, refill & reuse
Pure 304 (18/8)
& Vacuum Insulated
About the 350ml To Go Cup
The ECOtanka To Go Cup was designed to encourage the changeover from a paper cup to a reusable cup that is very much the same size and design as a paper cup.
The three main important design features we focused on are to keep a similar size as the standard 350ml paper cups, to make the top rim with the rolled edge in order to fit the standard 90mm single-use lids, and, of course, to give a comfortable and familiar drinking experience of most paper cups on the market.
The cup also fits nicely under most coffee-making machines which is another functional point.
NOTE: Since these videos were taken, the PP#5 plastic lid flip-top slicone seal has been redesigned to allow for the release of hot steam that built up. Due to this change, the lid does drip leak for hot drinks when upside down, but should not with cold liquid.
Coffee Cup With PP Push-On Lid
Coffee Cup With Bamboo & S.S. Lid
Coffee Cup With Single Use Lid
ECOtanka Push-On PP Lid
A Step-up from Single-Use to Multiple-Use
Design Feature: The ECOtanka To Go Cup's unique design allows it to fit most of the standard-and-currently-used 90mm single-use lids on the market, keeping the look and drinking experience much the same as a disposable paper cup. Some customers may prefer the familiar single-use lid until they want to fully move across to a reusable lid.
Once the drink is finished, the ECOtanka To Go Cup along with the single-use lid can both be cleaned to be reused. From our observations, one single-use lid can be reused multiple times before it needs replacing.
The ECOtanka Reusable Push-On PP Lid
ECOtanka has also designed a functional and reusable Push-On PP Lid made from high-grade PP#5 plastic (Japanese Material) that can handle high temperatures to keep drinks hot for longer in cold climates.
The Push-On PP lid has been designed to fit over the top-rolled rim (edge) much the same way the single-use lid does. The lid does drip leak with hot liquids when upside down but should not with cold liquids.
The opening of the drinking area is much bigger than single-use lids and an air hole allows for greater drinking flow.
All spare parts of the lid will be available for customers to purchase to reduce plastic waste in the environment. All silicone seals have been made using a very high grade German silicone and heat-treated to EU standards.
Bamboo & Stainless Steel Lid
The bamboo and stainless-steel lid provides an alternative to plastic lids, making the cup 100% pure and environmentally friendly.
The lid is about 99% spill-proof. Please watch the video demonstration to see its performance.
Using the bamboo & S.S. lid will keep your drink hot much longer than any other lid. To use this lid, the cup can only be filled to 320ml in volume due to the lid depth needed for the seal to lock the lid on.
The bamboo is made from sustainable natural resources, and the stainless steel 304 18/8 grade, and the seals high-grade German silicone. The silicone seal can also be replaced to prolong the lid's lifetime and to avoid lids from ending up in landfill.
Adding Colour to your Cup
The new leather look cup cover can add a different look and colour to your cup along with a different feeling when holding the cup.
The cover can be left on if washed by hand or taken off to give the cover a wash.
Copper-Coated Inner Layer
With the outer surface of the inner layer coated in copper, it helps to reduce heat transfer loss from the inner layer to the outer layer especially where the outer layer and inner layer are connected. The copper coating helps to keep your drink hot or cold for longer.
The gap between the inner and the outer layers is the area we vacuum, meaning we extract all the air from this area to prevent heat transfer from the inner layer through the gap to the outer layer, and that is the main insulation of the cup. This process is what allows you to hold and drink from the cup without feeling the real temperature inside the cup.
ECOtanka Reusable Push-On PP Lid on 90mm Paper Cup
The ECOtanka Reusable Push-on PP Lid also fits all paper cups with an opening diameter of 90mm.
The advantage of using our Push-on PP lid on a paper cup offers the following:
- Less plastic will be thrown away into our living environment.
- Better drinking flow than a single-use lid.
- Keep your drink hot longer.
For more information, please see the above or the video.
Car Cup Holders
The ECOtanka 350ml To Go Cup will fit most car cup holders thanks to its size and its ergonomically slim design, SMALL and HANDY.
With a cup firmly placed within a cup holder, you can be confident of its stability.
Thermal Temperature Reading with Push-on PP Lid
NOTE: White colour is the hottest colour, blue the coolest.
Thermal Temperature Reading with Bamboo & Stainless Steel Lid
NOTE: The colour you see on the cup, which is directly facing the jug, is a reflection of the heat from the jug.